Learn how to make silverclay jewellery

For this month’s Course Notes feature, we visited the Sussex studio of Paula Paton and learnt how to make jewellery using a versatile and relatively new material called silverclay.


I first came across silverclay a couple of years ago when I was given a gift bearing the imprint of my then baby son’s fingerprint. I was amazed by the fine detail and had always wondered how the technique was done, so when I came across Paula Paton’s Learn Silverclay workshops, I was keen to have a go myself and see what could be achieved as a complete beginner.

Paula teaches her workshops from a delightful purpose-built studio in her garden and keeps the groups small so she can give each student individual attention, as well as their own workstation. In our group of three I was intrigued to hear that one of the other students was in fact a professional jeweller who had heard about what could be achieved using silverclay and was interested to see how the results compared with using sheet silver.

Learn Silverclay Workshop

After an introduction to the tools and materials that we would be using, Paula showed us examples of what could be achieved using silverclay, and gave a demonstration of how the clay is used. A relatively new material, Precious Metal Clay (PMC) or silverclay as it’s also known, was originally developed in Japan. It contains tiny silver particles, a non-toxic binder and water. In this form it resembles clay and can easily be shaped and formed. Once dried, it’s then fired in a kiln or using a blowtorch which causes the binder to burn off, leaving behind pure (99.9%) silver, which can even be hallmarked as such.

Due to its purity silverclay doesn’t come cheap, and the small 16g pack that we were each given to work with costs around £21 to buy. I found it hard to imagine that this small grey blob resembling a piece of chewing gum would soon be transformed, as if by alchemy, into pure silver.

Our first project was to create a pendant using texture, moulds and construction techniques. Paula showed us how to roll out a small piece of clay to the required thickness, which involved starting with a stack of seven playing cards (lightly greased with badger balm) on either side, then gradually reducing them down to five cards. I had decided to create a leaf motif and Paula showed me how to press a fresh rose leaf from the garden into the clay to imprint the texture into it.

Learn Silverclay Workshop

Next I chose a tiny silicone mould of a dragonfly from the extensive selection available, and pressed a small amount of clay into the mould, before turning it out and attaching it to the leaf shape using liquid clay. I rolled out a small snake of clay to create a ‘bail’ to hang the pendant from and attached it to the top of the leaf. The pendant was then placed in a dehydrator (a sort of electric steamer in reverse) to dry it out quickly. Once dry, Paula suggested I use a small hand file to cut into the edges to create a more natural-looking, uneven edge around the leaf.

While our pendants were drying, it was time to try out another project using a different techniqe - this time adding pattern to the clay using a textured mat. For my second piece, I’d decided on a heart shape so I chose a mat with a script pattern based on a Victorian love letter. Pressing the rolled out clay onto the mat successfully imprinted the detailed pattern, and I then used a metal pastry cutter to create my heart shape, before placing the piece in the dehydrator to dry out.

Learn Silverclay Workshop

My third project of the day involved constructing a tiny three-dimensional Arum lily, again using a metal cutter to create the basic shape, which was then folded and pinched to resemble the flower petal. A tiny stamen was then piped into the inside using a syringe filled with clay.

Learn Silverclay Workshop

For my final project, by which time I had only a small amount of clay left, I decided to create a collection of small silver charms using silicone moulds featuring seashell and fossil motifs. Soon my clay was all gone and I had the grand total of eight separate pieces of soon-to-be silver jewellery languishing in the dehydrator.

Learn Silverclay Workshop

After drying, the clay pieces were placed on a mirror to ensure there was no moisture left, then declared ready for firing. Paula showed us a technique for firing the clay which can be done at home using a hand-held blowtorch, telling us that the clay would be ready 2 minutes after it achieved a salmon colour (poached not smoked!). But for speed’s sake, and because we had quite a lot between us, our pieces were placed in her professional kiln and fired for 10 minutes.

Learn Silverclay Workshop

For some reason, I had expected the dry white pieces to come out of the kiln miraculously transformed into shining silver, and was a little surprised when they emerged looking pretty much the same as when they went in. It turns out that a little more intervention is needed and Paula gave us each a stiff wire brush which we quickly got to work with. This is when the magic starts to happen – as the white dust gently falls away, the shiny silver beneath the surface begins to appear. Gradually I realised that what appeared to be brittle grey clay had in fact been transformed into very robust fine silver.

Learn Silverclay

Having seen the transformation with my leaf pendant I quickly moved onto my heart tag, brushing away the matt white coating to reveal the fine detail of the script imprinted into the silver.

Learn Silverclay Workshop

Last of all, I carefully buffed and polished each of my tiny silver charms until they came up glowing, while Paula showed me how to attach rings to them using solder and a blowtorch. She suggested I attach them to a length of chain to form a pendant, then we chose some seed pearl beads and strung the finished pendant onto an aqua leather thong to complete the ‘coastal’ look.

Learn Silverclay Workshop

As the sun started to set outside over Paula’s garden and the day drew to a close, I marvelled at how much we had achieved – both in terms of time, skills and techniques, but also from that small and rather uninspiring blob of greyish clay which we’d each started off with. The finished results are incredibly detailed – every vein was visible on my finished leaf pendant, and even the jeweller on the course commented on how this level of detail would be very hard to achieve using traditional methods.

This is really where silverclay comes into its own… as a complete novice you can achieve extremely impressive results very quickly and easily. All of the the tools and materials can be bought online in Paula’s PMC Shop, and past students also get a discount. For anyone interested in creating their own unique handmade gifts for Christmas or Valentine’s Day, take a look at the Ultimate Metal Clay Tool Kit, which gives you all of the tools and materials you need to get started with silverclay.

Finally, it just remains to say that Paula is one of those people who clearly just loves sharing her knowledge, skills and experience with others. She was welcoming, patient and kind, and it’s easy to see why her students return time and again to learn new techniques or brush up on their skills. As well as running the silverclay workshops and the online store, Paula somehow also manages to find time to design her own silver jewellery collection, which you can find at Paula Louise Paton.

All in all, this fascinating and fun one day workshop in the heart of the Sussex countryside is an excellent starting point for anyone wanting to create professional looking silver jewellery for themselves, for friends and family, or even as a business.

Learn Silverclay Workshop

Learn Silverclay Workshop

 


Resources:

Fancy trying out silverclay jewellery for yourself? For details of upcoming workshops with Paula Paton, visit www.learnsilverclay.co.uk.

To buy silverclay tools and materials, visit www.pmcshop.co.uk. You can find Paula’s own silver jewellery designs at www.paulalouisepaton.co.uk.

 

For more ideas and inspiration about working with precious metal clay, why not take a look at these books…

Magical Metal Clay Jewellery by Sue Heaser

Magical Metal Clay Jewellery book

Precious Metal Clay Techniques by Tim McCreight

Precious Metal Clay Techniques book

The Art of Metal Clay by Sherri Haab

The Art of Metal Clay book

 

Feeling inspired? Take a look at the Creative Courses category in our Directory, where you’ll find a variety of inspiring courses, from crafts to fashioninteriorscooking and gardening.

 If you run a creative course that you think our readers would be interested in reading about, do get in touch by emailing editor@frombritainwithlove.com.

 


Leave a comment

*